Triton range and characteristics

The product

The seamless steel diving cylinder Triton is manufactured by Productos Tubulares S.A.U. in its modern plant in Vizcaya (Spain) which has an experience over fifty five years in the production of high pressure steel cylinders.

The construction and production of our cylinders is based on the standards EN1964-1 and BS 5045 Part 7, and each and every cylinder must be approved by law.
Cylinders are delivered with modular valve, single outlet or in combination with a second outlet. It is also included a bottom. Cylinders are packed individually in special boxes allowing a safely transportation.

The characteristics of the available diving cylinders are listed in the next table:
 

Water capacity (litres)

Gas capacity (m3 )

Working Pressure (bar)

Test Pressure (bar)

Outside diameter (mm)

Length (mm)

Wall thickness (mm)

5

1,5

300

450

140

460

4,00

7

2,1

300

450

140

570

4,00

10

2,3

230

345

170

595

4,51

12

2,4

200

300

204

530

4,2

12

2,76

230

345

170

695

4,51

12

2,76

230

345

204

530

4,8
13,5 2,7 230 345 204 575 4,2

13,5

3,11

230

345

204

575

4,8

15

3

200

300

204

620

4,2

15

3,45

230

345

204

630

4,8

Also available 50 litres cylinders for 300/450 bar test pressure and one or two shoulders fitted with valves as a complement for the compressors, allowing you to fill your scuba-cylinders quickly and safely.

Back